1. In the installation of countertops, it is advisable to avoid extensive cutting and drilling of quartz stones on the construction site. On the one hand, this is to prevent cutting dust from polluting the construction site, and on the other hand, it is to prevent errors caused by inaccurate cutting.
2. When designing the opening position of the stove, the distance between the opening position of the countertop and the edge of the countertop should be greater than or equal to 8 centimeters to prevent cracking of the countertop hole position. When opening the stove opening, first use a cutting machine or a curved saw to open the hole, and then use a gong machine or a hand grinder to polish and trim the edge to achieve a smooth effect. The radius of the four corners of the circle is basically uniform. Due to the serrated marks and residual cracks around the cut hole caused by the curved saw and cutting machine, it is easy to cause cracking at the opening.
3. Quartz stones are generally installed by splicing. When choosing the splicing position, try to avoid corners and furnace openings as much as possible. Due to the thermal expansion and contraction characteristics of quartz, cracking may occur near a furnace or corner.
4. When installing the quartz stone countertop, transparent glass glue will be applied to the connection between the countertop and the sink. Before gluing, it is necessary to check whether the outer packaging of the glass glue is labeled with anti mold function. After gluing, it is important to urge workers to clean up excess glue in a timely manner.
5. Due to the high hardness and density of quartz stone countertops, there are high requirements for processing technology. Therefore, for the installation of quartz stone countertops, professional quartz stone installers should be contacted and professional tools should be used for installation. Blind installation should not be done on one's own to avoid unnecessary trouble.